16-port gigabit PoE switch with 2 uplinks and 2 SFP
Unmanaged rack-mount gigabit PoE switch with 16 PoE+ ports, two gigabit uplink ports and two SFP slots. Its PoE output is 135 W in total and 30 W per port.
- PoE ports
- 16
- Uplink ports
- 2
- PoE budget
- 135 W
- SFP
- 2 x SFP
- Download datasheet PDF
- Warranty as per Tenda terms. Claims are handled through our service team.
Overview
Highlights
- 16 x 10/100/1000 Mbps PoE+ ports (802.3af/at), 30 W per port
- 135 W total PoE output
- 2 x gigabit RJ45 uplinks and 2 x 1000Base-X SFP slots
- Four modes: standard, priority, extend and VLAN
- 1U 19-inch rack case, 40 Gbps switching capacity, 6 kV lightning protection
- 8K MAC address table, 4 Mb buffer
At a glance
A 16-port gigabit PoE switch with 2 uplink ports, an SFP slot for fibre and a 135 W PoE budget, for powering and connecting IP cameras over Cat6.
- PoE ports
- 16, Gigabit
- Uplink
- 2 ports to the NVR or network
- SFP
- SFP
- PoE budget
- 135 W
- Cable
- Cat6, up to 100 m per run to each camera Cat6 cable
PoE budget check
Cameras this switch can power at a typical draw per camera, using the 135 W budget and 16 PoE ports.
| Power per camera | Cameras | Power used | Limited by |
|---|---|---|---|
| 4 W | 16 | 64 W of 135 W | Port count |
| 6 W | 16 | 96 W of 135 W | Port count |
| 8 W | 16 | 128 W of 135 W | Port count |
Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.
Check a budget for your own camerasSpecifications
Ports and standards
- Network standards
- IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
- LED indicator
- One Link/Act LED per portOne PoE MAX LED per portOne Power LED per device
- Interfaces
- 16 x 10/100/1000 Base-T Ethernet ports (Data/Power)2 x 10/100/1000 Base-T Ethernet ports (Data)2 x 100/1000 Base-X SFP ports
- Transmission media
- Recommended: CAT5/5e UTP or better
Performance
- Forwarding mode
- Store-and-forward
- Switch capacity
- 40 Gbps
- Packet forwarding rate
- 29.8 Mpps
- Buffer
- 4 Mb
- MAC address table
- 8K
PoE
- PoE budget
- Total PoE output: 135 WSingle port: 15.4 W (802.3af), 30 W (802.3at)
Power
- Power consumption
- Below 150 W
- Input voltage
- 100 to 240 V AC, 50/60 Hz
Physical and environment
- Fan quantity
- 1
- Dimensions
- 440 x 178 x 44 mm
- Level of protection (port)
- 6 kV
- Level of protection (power)
- 6 kV
- Rack mounting
- Supported
- Desktop mounting
- Supported
- Wall mounting
- Supported
- Operating temperature
- 0 to 45 °C
- Storage temperature
- -40 to 70 °C
- Operating humidity
- 10% to 90%, non-condensing
- Storage humidity
- 5% to 90%, non-condensing
- Certification
- FCC, CE, RoHS
Features
- Network modes
- Standard: all ports communicate with each other, like an ordinary unmanaged PoE switchPriority: ports 1 to 8 are high-priority portsExtend: ports 9 to 16 reach up to 250 m and all ports communicate with each otherVLAN: ports 1 to 16 cannot communicate with each other but can communicate with ports 17, 18, SFP1 (19) and SFP2 (20)
Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.
Tenda product pageMedia
Photos 4
Downloads
Official information
Tenda product page for TEG1120P-16-150WWorks with
IP cameras
-
View details -
View details -
View details -
View details -
View details -
View details -
View details -
View details
NVRs
-
View details -
View details -
View details -
View details -
View details -
View details -
View details -
View details
Cat6 cable
-
View details -
View details -
View details -
View details -
View details -
View details
Support
Warranty and repairs
Warranty is as per Tenda’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.
From Tenda
Practical notes
- Add up the power draw of connected cameras and keep it within the PoE budget.
- Keep each Cat6 run within 100 m.
- Mount the switch where it can ventilate, ideally in a rack.
Request a quote
Share the quantity and delivery location for TEG1120P-16-150W. Our sales desk replies with price and availability, subject to stock.
Enquiry received
Similar models
-
View details -
16-port PoE switch with 2 gigabit uplinks and 1 SFP
TEF1118P-16
- 16 poe ports
- 2 uplink ports
- 130 W (150 W whole device)
View details -
24-port gigabit PoE switch with 2 uplinks and 2 SFP
TEG1128P-24-250W
- 24 poe ports
- 2 uplink ports
- 230 W
View details -
8-port gigabit L3 managed PoE switch with 1 uplink and 1 SFP
TEG5310P
- 8 poe ports
- 1 uplink ports
- 130 W
View details -
View details -
View details -
View details -
View details
Pairs with
-
View details -
View details -
View details -
View details -
View details -
View details -
View details -
View details