16-port PoE switch with 2 gigabit uplinks and 1 SFP
Unmanaged PoE switch with 16 Fast Ethernet PoE+ ports, two gigabit uplink ports and a combo SFP slot. Its PoE output is 130 W in total and 30 W per port.
- PoE ports
- 16
- Uplink ports
- 2
- PoE budget
- 130 W (150 W whole device)
- SFP
- 1 x SFP (combo)
- Download datasheet PDF
- Warranty as per Tenda terms. Claims are handled through our service team.
Overview
Highlights
- 16 x 10/100 Mbps PoE+ ports (802.3af/at), 30 W per port
- 130 W total PoE output
- 2 x gigabit RJ45 uplinks and 1 x combo SFP slot
- Four modes set by a DIP switch: standard, priority, extend and VLAN
- 6 kV lightning protection, desktop or rack mounting
- 7.2 Gbps switching capacity, 4K MAC address table
At a glance
A 16-port PoE switch with 2 uplink ports, an SFP slot for fibre and a 130 W PoE budget, for powering and connecting IP cameras over Cat6.
- PoE ports
- 16, Fast Ethernet
- Uplink
- 2 ports to the NVR or network
- SFP
- SFP
- PoE budget
- 130 W (150 W whole device)
- Cable
- Cat6, up to 100 m per run to each camera Cat6 cable
PoE budget check
Cameras this switch can power at a typical draw per camera, using the 130 W budget (the lower of the listed figures) and 16 PoE ports.
| Power per camera | Cameras | Power used | Limited by |
|---|---|---|---|
| 4 W | 16 | 64 W of 130 W | Port count |
| 6 W | 16 | 96 W of 130 W | Port count |
| 8 W | 16 | 128 W of 130 W | Port count |
Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.
Check a budget for your own camerasSpecifications
Ports and standards
- Network standards
- IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.3af/at
- LED indicator
- 16 x Link/Act LEDs, 1 x G1 LED, 1 x G2/SFP2 LED, 1 x PoE-MAX LED, 1 x Power LED
- Interfaces
- 16 x 10/100 Base-TX Ethernet ports (Data/Power)2 x 10/100/1000 Base-T Ethernet ports (Data)1 x 1000 Base-X SFP port (Combo)
- Transmission media
- Recommended: CAT5/5e UTP or better
Performance
- Forwarding mode
- Store-and-forward
- Switch capacity
- 7.2 Gbps
- Packet forwarding rate
- 5.36 Mpps
- Buffer
- 1.25 Mb
- MAC address table
- 4K
PoE
- PoE budget
- Total PoE output: 130 WSingle port: 15.4 W (802.3af), 30 W (802.3at)Whole device: 150 W
Power
- Input voltage
- 100 to 240 V AC 50/60 Hz
Physical and environment
- Dimensions
- 294.0 x 178.8 x 44.0 mm
- Lightning protection for ports
- 6 kV
- Lightning protection for power
- 6 kV
- ESD air discharge
- ±10 kV
- ESD contact discharge
- ±8 kV
- Desktop mounting
- Supported
- Wall mounting
- Supported
- Rack mounting
- Supported
- Operating temperature
- 0 to 45 °C
- Storage temperature
- -40 to 70 °C
- Operating humidity
- 10% to 90%, non-condensing
- Storage humidity
- 5% to 90%, non-condensing
- Certification
- FCC, CE, RoHS
Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.
Tenda product pageMedia
Photos 4
Downloads
Official information
Tenda product page for TEF1118P-16Works with
IP cameras
-
View details -
View details -
View details -
View details -
View details -
View details -
View details -
View details
NVRs
-
View details -
View details -
View details -
View details -
View details -
View details -
View details -
View details
Cat6 cable
-
View details -
View details -
View details -
View details -
View details -
View details
Support
Warranty and repairs
Warranty is as per Tenda’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.
From Tenda
Practical notes
- Add up the power draw of connected cameras and keep it within the PoE budget.
- Keep each Cat6 run within 100 m.
- Mount the switch where it can ventilate, ideally in a rack.
Request a quote
Share the quantity and delivery location for TEF1118P-16. Our sales desk replies with price and availability, subject to stock.
Enquiry received
Similar models
-
View details -
16-port gigabit PoE switch with 2 uplinks and 2 SFP
TEG1120P-16-150W
- 16 poe ports
- 2 uplink ports
- 135 W
View details -
View details -
View details -
View details -
View details -
View details -
24-port gigabit PoE switch with 2 uplinks and 2 SFP
TEG1128P-24-250W
- 24 poe ports
- 2 uplink ports
- 230 W
View details
Pairs with
-
View details -
View details -
View details -
View details -
View details -
View details -
View details -
View details