16-port PoE switch
16 ports unmanaged PoE switch with 2 gigabit uplink & SFP ports. Switch that powers and connects IP cameras over Ethernet cable.
- PoE ports
- 16
- Uplink ports
- 2 (incl. SFP)
- PoE budget
- 300 W
- Download datasheet PDF
- Warranty as per CP PLUS terms. Claims are handled through our service team.
Overview
Highlights
- 16× RJ45 (10/100 Mbps) ports, 1 to 14 PoE, 15 to 16 high-power PoE (60 W support), 2× Uplink RJ45 ports (10/100/1000 Mbps), 1 SFP ports
- Extended transmission mode up to 250m at 10 Mbps (1-15 Ports)
- Networking standard: IEEE 802.3i (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3ab (1000BASE-T), IEEE 802.3x (Flow control), IEEE 802.3af/at/bt (PoE support)
- PoE Power Budget: 300 W (Max 30 W/60 W per port)
- Easy and safe installation: plug-and-play, desktop design
At a glance
A 16-port PoE switch with 2 uplink ports, an SFP slot for fibre and a 300 W PoE budget, for powering and connecting IP cameras over Cat6.
- PoE ports
- 16, Fast Ethernet
- Uplink
- 2 (incl. SFP)
- SFP
- SFP
- PoE budget
- 300 W
- Cable
- Cat6, up to 100 m per run to each camera Cat6 cable
PoE budget check
Cameras this switch can power at a typical draw per camera, using the 300 W budget and 16 PoE ports.
| Power per camera | Cameras | Power used | Limited by |
|---|---|---|---|
| 4 W | 16 | 64 W of 300 W | Port count |
| 6 W | 16 | 96 W of 300 W | Port count |
| 8 W | 16 | 128 W of 300 W | Port count |
Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.
Check a budget for your own camerasSpecifications
Ports
- Network port
- 19 Ports
- PoE ports
- 1-14 Ports: 10/100Mbps PoE ports (RJ45), 15 Ports: 10/100Mbps PoE ports Support bt 60W High Power, 16 Ports: 10/100/1000Mbps PoE port (RJ45), Support bt 60W High Power
- Uplink ports
- 2, 10/100/1000Mbps uplink ports (RJ45); 1, 10/100/1000Mbps SFP port
Switching
- Network standard
- IEEE 802.3i 10BASE-T/IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3x Flow Control, IEEE 802.3af/at/bt Power over Ethernet
- Bandwidth
- 11.0Gbps
- Network latency
- ≤16μs (use the 64byte package size)
- Packet forwarding rate
- 8.2Mbps
- MAC address table
- 8K
- AI watchdog
- Support
- Transmission rate
- 1000Mbps: Full Duplex Only; 10/100Mbps: Full Duplex / Half Duplex
- Transmission distance
- Port1~15: 10/100Mbps 130meters; 10Mbps Auto-adaption 250meters, Port16: 10/100/1000Mbps 130meters
Protection
- Protection
- ESD Protection:8KV Lightning Protection:6KV
Power and environment
- Power source
- Built-in Power Supply Input: AC 100~240V Total≤300W Output: PoE 1~14 Port:1/2(+52V),3/6(GND)≤30W PoE 15~16 Port:1245(+52V), 3678(GND) Compatible1/2(+52V),3/6(GND)≤60W
- Operating temperature
- -30°C ~60°C
- Operating humidity
- 10%~90% Non-condensing
- Storage temperature
- -40°C~70°C
- Storage humidity
- 5%~90% Non-condensing
- Dimensions
- 440mm x 180mm x 45mm
- Weight
- 2650g
- Certificates
- ISO 9001: 2015, ISO 20000-1: 2018, ISO 14001: 2015, ISO 45001: 2018, ISO 50001:2018, CE, FCC and RoHS, TEC/ MTCTE
Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.
CP PLUS product pageMedia
Photos 1
Downloads
Official information
CP PLUS product page for CP-ANW-HP16G2F1-N30Works with
IP cameras
-
View details -
View details -
View details -
View details -
View details -
View details -
View details -
View details
NVRs
-
View details -
View details -
View details -
View details -
View details -
View details -
View details -
View details
Cat6 cable
-
View details -
View details -
View details -
View details -
View details -
View details
Support
Warranty and repairs
Warranty is as per CP PLUS’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.
From CP PLUS
Practical notes
- Add up the power draw of connected cameras and keep it within the PoE budget.
- Keep each Cat6 run within 100 m.
- Mount the switch where it can ventilate, ideally in a rack.
Request a quote
Share the quantity and delivery location for CP-ANW-HP16G2F1-N30. Our sales desk replies with price and availability, subject to stock.
Enquiry received
Similar models
-
View details -
View details -
16-port PoE switch with 2 gigabit uplinks and 1 SFP
TEF1118P-16
- 16 poe ports
- 2 uplink ports
- 130 W (150 W whole device)
View details -
View details -
View details -
View details -
View details -
View details
Pairs with
-
View details -
View details -
View details -
View details -
View details -
View details -
View details -
View details