Enquiry list Contact sales
Products

Surveillance

Installation and accessories

Networking

Access and attendance

Computer components

Storage

Power and UPS

Peripherals and displays

Printing and POS

Software

All product categories
Brands
All brands
Support
Company
Enquiry list Contact sales

PoE switches

4-port PoE switch

Model CP-UNW-HPU4H2-48

4 ports unmanaged PoE switch with 2 uplink ports. Switch that powers and connects IP cameras over Ethernet cable.

PoE ports
4
Uplink ports
2
PoE budget
48 W
Request a quote
Overview Specifications Media Works with Support
Request a quote

Overview

Highlights

  • 4 × RJ-45 10/100 Mbps (PoE) Ports, 2 × RJ-45 10/100 Mbps (Uplink) Ports
  • Extended transmission mode up to 250m at 10 Mbps
  • Networking Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
  • PoE Power Budget: 48 W (Max 30 W per port)
  • Easy and safe installation: plug-and-play, desktop design

At a glance

A 4-port PoE switch with 2 uplink ports and a 48 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
4, Fast Ethernet
Uplink
2 ports to the NVR or network
PoE budget
48 W
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 48 W budget and 4 PoE ports.

Power per camera Cameras Power used Limited by
4 W 4 16 W of 48 W Port count
6 W 4 24 W of 48 W Port count
8 W 4 32 W of 48 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports

Network port
6 Ports
PoE ports
4 × RJ-45 10/100 Mbps (PoE) Ports
Uplink ports
2 × RJ-45 10/100 Mbps (Uplink) Ports
DIP switch
Long Distance PoE: The transmission distance of ports 1 to 4 can reach up to 250 meters. The negotiation speed can be reduced to 10 Mbps

PoE

PoE pin assignment
1/2+, 3/6-
Long distance PoE transmission
Support
PoE power budget
48W (Max 30W per port)

Switching

Network standard
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Switching capacity
1.2 Gbps
Packet forwarding rate
0.893 Mbps
MAC address list
2K
Packet buffer
768 Kbit
Jumbo frame
2048 Byte

Protection

ESD protection
Air discharge: 8KV, Contact discharge: 6KV
Lightning protection
Common mode: 6KV, Differential mode: 1KV

Power and environment

Power source
Built-in power supply:200-240 VAC, 50/60 Hz, Max. 1 A
Power consumption
Idling: 0.3 W, Full load: 48 W
Operating temperature
, 10°C to +45°C
Operating humidity
10% to 90% (RH), non-condensing
Storage temperature
-10°C to +45°C
Storage humidity
5% to 95% (RH), non-condensing
Casing
Sheet Metal
Dimensions
180mm × 112mm × 44mm
Weight
420 g
Certificates
ISO 9001: 2015, ISO 20000-1: 2018, ISO 14001: 2015, ISO 45001: 2018, ISO 50001:2018, CE, FCC and RoHS, TEC/ MTCTE

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

CP PLUS product page

Media

Photos 1

Downloads

Official information

CP PLUS product page for CP-UNW-HPU4H2-48 cpplusworld.com

Works with

IP cameras

View all

NVRs

View all

Cat6 cable

View all

Support

Warranty and repairs

Warranty is as per CP PLUS’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From CP PLUS

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for CP-UNW-HPU4H2-48. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

All PoE switches

Pairs with

CP PLUS CP-UNW-HPU4H2-48