PoE switches

4-port gigabit PoE switch

Model CP-DNW-GPU4G2-48C

4 ports gigabit unmanaged PoE switch with 2 gigabit uplink ports. Switch that powers and connects IP cameras over Ethernet cable.

PoE ports
4
Uplink ports
2
PoE budget
48 W
PoE standard
IEEE802.3af, IEEE802.3at

Overview

Highlights

  • 4 × RJ-45 10/100/1000 Mbps (PoE) Ports, 2 × RJ-45 Gigabit (Uplink) Ports
  • Extended transmission mode up to 250m at 10 Mbps (Port 3 to 4)
  • Networking standard: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
  • PoE Power Budget: 48 W (Max 30 W per port)
  • Switching Capacity: 12 Gbps (Full-duplex)
  • Easy and safe installation: plug-and-play, desktop design

At a glance

A 4-port gigabit PoE switch with 2 uplink ports and a 48 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
4, Gigabit
Uplink
2 ports to the NVR or network
PoE budget
48 W
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 48 W budget and 4 PoE ports.

Power per camera Cameras Power used Limited by
4 W 4 16 W of 48 W Port count
6 W 4 24 W of 48 W Port count
8 W 4 32 W of 48 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports

Network port
6 Ports
PoE ports
4, 1000Mbps, RJ45 ports, Max. 30W Output of Single PoE Port Transmission distance: 0~100m or 0~250m selected by switch
Uplink ports
2, 1000Mbps, Transmission Distance: Default: 0-100m
Power indicator
Light on: Powering Light off: No Power
DIP switch indicator
Green light off: Normal/Default mode Green light on: VLAN mode Green light flash: Extend mode
RJ-45 ACT indicator
Green light off: Link is disconnected Green light on: Link is connected Green light flash: Data Transmitting

PoE

PoE standard
IEEE802.3af, IEEE802.3at
PoE power supply
1/2(+), 3/6(-)
PoE feature
All ports support MDI/MDIX
PoE power budget
48W

Switching

Network standard
IEEE 802.3,IEEE 802.3u,IEEE 802.3ab,IEEE 802.3z,IEEE802.3x
Switch capacity
12 Gbps Full duplex
Packet forwarding rate
1.488 Mpps/port
Forwarding mode
Store-and-forward
MAC address table
2K
VLAN
Support
Watchdog
Support
Transmission distance
0-100m/1000Mbps or Port 3-4 Max. 250m/10Mbps via Cat.5e or more under Extend mode

Protection

ESD
Air discharge: 8KV Contact discharge: 6KV
Surge protection
Common mode/RJ45 port: 6KV Differential mode/RJ45 port: 2KV Common mode/Power board: 6KV Differential mode/Power board: 2KV

Power and environment

Power source
Built-in Power Supply Input: 100-240V AC, 50/60Hz
Power consumption
<5W
Operating temperature
-10°C ~50°C
Operating humidity
10%-95%, Non-condensing
Storage temperature
-40°C~70°C
Dimensions
200 mm x 118 mm x 44 mm
Weight
600 g
Certificates
ISO 9001: 2015, ISO 20000-1: 2018, ISO 14001: 2015, ISO 45001: 2018, ISO 50001:2018, CE, FCC and RoHS, TEC/ MTCTE

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

CP PLUS product page

Works with

IP cameras

Cat6 cable

Support

Warranty and repairs

Warranty is as per CP PLUS’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From CP PLUS

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for CP-DNW-GPU4G2-48C. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

Pairs with