Enquiry list Contact sales
Products

Surveillance

Installation and accessories

Networking

Access and attendance

Computer components

Storage

Power and UPS

Peripherals and displays

Printing and POS

Software

All product categories
Brands
All brands
Support
Company
Enquiry list Contact sales

PoE switches

8-port PoE switch

Model CP-DNW-HPU8G2-96-V3

8 ports unmanaged PoE switch with 2 gigabit uplink ports. Switch that powers and connects IP cameras over Ethernet cable.

PoE ports
8
Uplink ports
2
PoE budget
96 W
PoE standard
IEEE802.3af, IEEE802.3at
Request a quote
Overview Specifications Media Works with Support
Request a quote

Overview

Highlights

  • 8 × RJ-45 10/100 Mbps (PoE) Ports, 2 × RJ-45 Gigabit (Uplink) Ports
  • Extended transmission mode up to 250m at 10 Mbps
  • Network Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
  • PoE Power Budget: 96 W (Max 30 W per port)
  • Switching Capacity: 5.6 Gbps (Full duplex)
  • Easy and safe installation: plug-and-play, desktop design

At a glance

An 8-port PoE switch with 2 uplink ports and a 96 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
8, Fast Ethernet
Uplink
2 ports to the NVR or network
PoE budget
96 W
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 96 W budget and 8 PoE ports.

Power per camera Cameras Power used Limited by
4 W 8 32 W of 96 W Port count
6 W 8 48 W of 96 W Port count
8 W 8 64 W of 96 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports

Network port
10 Ports
PoE ports
8, 10/100Mbps; RJ45 Ports; Max. 30W Output of Single PoE Port
Uplink ports
2, 1000Mbps, RJ45 Ports, Transmission Distance: Default: 0-100m
Power indicator
Light on: Powering Light off: No Power
Mode indicator
Light off: Normal mode Flash: Extend mode
1-20 indicator (link & data)
Green light off: Link is disconnected Green light on: Link is connected Green light flash: Data Transmitting
1-16 indicator (PoE)
Yellow light off: PoE not powering Yellow light on: PoE powering
PoE max indicator
Light off: Indicates PoE power usage is less than 90% Light flash: Indicates PoE power usage 90%≤P≤95% Light on: Indicates PoE power usage 95%
Extend switch
OFF: All ports can communicate with each other, the transmission rate is 10/100/1000Mbps adaptive, and the watchdog function is turned off

PoE

PoE standard
IEEE802.3af, IEEE802.3at
PoE power supply
1/2(+), 3/6(-)
PoE power budget
96W (Max 30W per port)
PoE feature
All ports support MDI/MDIX

Switching

Network standard
IEEE 802.3,IEEE 802.3u,IEEE 802.3ab,IEEE 802.3z,IEEE802.3x
Switch capacity
5.6Gbps (non-blocking)
Packet forwarding rate
4.166Mpps
Packet buffer
3Mb
Forwarding mode
Store-and-forward
MAC address table
8K
AI watchdog
Support
Transmission distance
0-100m/100Mbps or Max. 250m/10Mbps via Cat.5e or more under Extend mode

Protection

ESD
Air discharge: 8KV
Surge protection
Common mode/RJ45 port: 4KV

Power and environment

Power source
Built-in Power Supply
Power consumption
<5W
Operating temperature
-10°C ~50°C
Operating humidity
10%-95%, Non-condensing
Storage temperature
-40°C~70°C
Dimensions
320mm x 207mm x 44mm
Weight
1780g
Certificates
ISO 9001: 2015, ISO 20000-1: 2018, ISO 14001: 2015, ISO 45001: 2018, ISO 50001:2018, CE, FCC and RoHS, TEC/ MTCTE

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

CP PLUS product page

Media

Photos 1

Downloads

Official information

CP PLUS product page for CP-DNW-HPU8G2-96-V3 cpplusworld.com

Works with

IP cameras

View all

NVRs

View all

Cat6 cable

View all

Support

Warranty and repairs

Warranty is as per CP PLUS’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From CP PLUS

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for CP-DNW-HPU8G2-96-V3. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

All PoE switches

Pairs with

CP PLUS CP-DNW-HPU8G2-96-V3