PoE switches

8-port gigabit PoE switch

Model CP-ANW-GPU8G2F2-N12

8 port gigabit unmanaged PoE switch with 2 gigabit uplinks & 2 SFP ports. Switch that powers and connects IP cameras over Ethernet cable.

PoE ports
8
Uplink ports
2 (incl. SFP)
PoE budget
120 W

Overview

Highlights

  • 8× RJ45 (10/100/1000 Mbps), 1 to 6 PoE/ 7 to 8 high-power PoE (60 W support), 2× Uplink RJ45 ports (10/100/1000 Mbps), 2× SFP ports (10/100/1000 Mbps)
  • Transmission mode up to 130m
  • Networking standard: IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX), IEEE 802.3ab (1000BASE-T), IEEE 802.3x (Flow control), IEEE 802.3af/at/bt (PoE support)
  • PoE Power Budget: 120 W (Max 30 W/60 W per port)
  • Easy and safe installation: plug-and-play, desktop design

At a glance

An 8-port gigabit PoE switch with 2 uplink ports, an SFP slot for fibre and a 120 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
8, Gigabit
Uplink
2 (incl. SFP)
SFP
SFP
PoE budget
120 W
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 120 W budget and 8 PoE ports.

Power per camera Cameras Power used Limited by
4 W 8 32 W of 120 W Port count
6 W 8 48 W of 120 W Port count
8 W 8 64 W of 120 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports

Network port
12 Ports
PoE ports
1-6 Ports: 10/100/1000Mbps PoE ports (RJ45); 7-8 Ports: 10/100/1000Mbps PoE ports (RJ45),Support bt 60W High Power
Uplink ports
2, 10/100/1000Mbps uplink ports (RJ45), 2, 10/100/1000Mbps SFP ports

PoE

PoE power budget
120W (Max 30W/60W per port)

Switching

Network standard
IEEE 802.3i 10BASE-T/IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3x Flow Control, IEEE 802.3af/at/bt Power over Ethernet
Bandwidth
24Gbps
Network latency
≤16μs (use the 64byte package size)
Packet forwarding rate
17.9Mpps
MAC address table
8K
AI watchdog
Support
Transmission rate
1000Mbps: Full Duplex Only; 10/100Mbps: Full Duplex / Half Duplex
Transmission distance
130m

Protection

Protection
ESD Protection:8KV Lightning Protection:6KV

Power and environment

Power source
Built-in Power Supply Input: AC 90~240V Total≤120W Output: PoE 1~6 Port: 1/2(+52V), 3/6(GND)≤30W PoE 7~8 Port:1245(+52V), 3678(GND) Compatible1/2(+52V), 3/6(GND)≤60W
Operating temperature
-30°C ~60°C
Operating humidity
10%~90% Non-condensing
Storage temperature
-40°C~70°C
Storage humidity
5%~90% Non-condensing
Dimensions
190mm x 140mm x 43mm
Weight
1000g
Certificates
ISO 9001: 2015, ISO 20000-1: 2018, ISO 14001: 2015, ISO 45001: 2018, ISO 50001:2018, CE, FCC and RoHS, TEC/ MTCTE

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

CP PLUS product page

Works with

IP cameras

Cat6 cable

Support

Warranty and repairs

Warranty is as per CP PLUS’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From CP PLUS

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for CP-ANW-GPU8G2F2-N12. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

Pairs with