Enquiry list Contact sales
Products

Surveillance

Installation and accessories

Networking

Access and attendance

Computer components

Storage

Power and UPS

Peripherals and displays

Printing and POS

Software

All product categories
Brands
All brands
Support
Company
Enquiry list Contact sales

PoE switches

8-port gigabit L3 managed PoE switch with 1 uplink and 1 SFP

Model TEG5310P

Layer 3 managed PoE switch with eight gigabit PoE+ ports, one gigabit uplink port and one SFP slot. Its PoE output is 130 W in total and 30 W per port.

PoE ports
8
Uplink ports
1
PoE budget
130 W
SFP
1 x SFP
Request a quote
Overview Specifications Media Works with Support
Request a quote

Overview

Highlights

  • 8 x 10/100/1000 Mbps PoE+ ports (802.3af/at), 30 W per port
  • 130 W total PoE output
  • 1 x gigabit RJ45 uplink and 1 x 1000Base-X SFP slot
  • Layer 3 static routing, IEEE 802.1Q VLAN and link aggregation
  • PoE scheduling, over-temperature protection and port priority
  • 20 Gbps switching capacity, 6 kV lightning protection, web, Telnet and SNMP management

At a glance

An 8-port gigabit PoE switch with 1 uplink port, an SFP slot for fibre and a 130 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
8, Gigabit
Uplink
1 port to the NVR or network
SFP
SFP
PoE budget
130 W
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 130 W budget and 8 PoE ports.

Power per camera Cameras Power used Limited by
4 W 8 32 W of 130 W Port count
6 W 8 48 W of 130 W Port count
8 W 8 64 W of 130 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports and standards

Network standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.3af/at, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1d, IEEE 802.1s
LED indicator
1 x Link/Act or PoE LED indicator1 x LED indicator for Link or Link/Act display mode1 x PoE mode converting LED indicator1 x PoE Max LED indicator1 x Power LED indicator1 x SYS LED indicator
Interfaces
8 x 10/100/1000 Base-T Ethernet ports (Data/Power)1 x 10/100/1000 Base-T Ethernet port (Data)1 x 1000 Base-X SFP port (Data)
Transmission media
Recommended: CAT5/5e UTP or better

Performance

Forwarding mode
Store-and-forward
Switch capacity
20 Gbps
Packet forwarding rate
14.90 Mpps
Buffer
12 Mb
MAC address table
16K
Jumbo frame
10K

PoE

PoE power supply management
Supported
PoE budget
Total PoE output: 130 WSingle port: 15.4 W (802.3af), 30 W (802.3at)

Power

Input voltage
100 to 240 V AC 50/60 Hz
Power consumption
Full load: <160 WEmpty load: <12 W
Energy efficient
Supported

Physical and environment

Lightning protection for ports
6 kV
Lightning protection for power
6 kV
ESD air discharge
±10 kV
ESD contact discharge
±8 kV
Dimensions
294.0 x 179.6 x 44.0 mm
Desktop mounting
Supported
Wall mounting
Supported
Rack mounting
Not supported
Operating temperature
0 to 45 °C
Storage temperature
-40 to 70 °C
Operating humidity
10% to 90% RH, non-condensing
Storage humidity
5% to 90% RH, non-condensing
Certification
FCC, CE, RoHS

Software

L3 features
VLAN-based routing, IPv4 static routing adding, Static ARP adding/deleting, ARP aging time configuration
PoE power supply management
Supports port PoE configuration and power supply with prioritySupports PoE over-temperature protectionSupports PoE scheduled managementSupports intelligent management and PoE-powered device detection(port status, power assignment and PoE-powered device status)
Security features
ARP receiving limit, Unknown MAC address discard, DoS attack defence, 802.1x security authentication, Radius security authentication
VLAN
IEEE 802.1Q VLANVLAN Layer-3 interfacesSupports three port modes: Access, Trunk and hybrid
DHCP
DHCP server, DHCP relay, DHCP snooping, Supports Option 82 policy configuration
Port aggregation
Static aggregationLACP dynamic aggregation
Spanning tree
IEEE 802.1d STP (Spanning Tree Protocol)IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)Supports edge portSupports BPDU statistics
Multicast
IGMP snooping V1/V2/V3Supports port fast leave
Port mirroring
Supports N: 1 port mirroring
Quality of service
SP (Strict Priority)SWRR (Simple Weighted Round Robin)WRR (Weighted Round Robin)Supports 802.1p port trust modeSupports DSCP port trust modeSupports a maximum of 8-queue service quality mapping
ACL
Supports MAC ACL and IP ACL
Loading and upgrade
Supports FTP/TFTP/HTTP upgradeSupports configuration import and export
Management and maintenance
Supports Telnet, Supports SNMP V1/V2/V3, Supports web management and maintenance, Supports ping/Tracert/Connection detection, CPU Monitoring and memory monitoring, Local visualisation management

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

Tenda product page

Media

Photos 4

Downloads

Official information

Tenda product page for TEG5310P tendacn.com

Works with

IP cameras

View all

NVRs

View all

Cat6 cable

View all

Support

Warranty and repairs

Warranty is as per Tenda’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From Tenda

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for TEG5310P. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

All PoE switches

Pairs with

Tenda TEG5310P 1 / 4