View details
Solar panel kit with battery
Model CP-SL06K
Solar panel kit with built-in battery. Managed from the mobile app, with local recording to a microSD card where the model supports it.
- Audio
- Built-in mic
- Download datasheet PDF
- Warranty as per CP PLUS terms. Claims are handled through our service team.
Overview
Highlights
- The maximum power output is 30 W
- Backup time 12 Hours (Assumption based on 76.8Wh Battery Capacity and 5.5 Watt continuous load)
- Indications LED Battery charging: Green Blink
- Indications LED Full charge: Green ON
- Indications LED Battery discharge: Red ON
What it needs
- Camera
- A compatible 4G camera; the specifications list the models it is meant for 4G cameras
- Site
- A mounting position with clear sunlight for most of the day
Specifications
Lens and coverage
- Panel operating temperatures
- -20 °C to +65 °C
Power
- Cell type
- Monocrystalline
- No. of cells
- 32
- Open circuit voltage
- 22.9 V+/- 10%
- Short circuit current
- 1.59 A +/-
- Voltage at maximum power
- 19.25 V +/- 10%
- Current at maximum power
- 1.56 A +/- 10%
- Maximum power
- 30 W
- Nominal operating cell temperature
- 45 °C ± 2 °C
- Charge current
- Up to 1.5 A (Depends on Solar irradiation and Battery SOC)
- Charge cutoff voltage
- 14.6V +/- 10%
- Battery packaging
- PVC
- Voltage during charging
- 12V (+/-10%), Will be adjusted slightly based on Cable length
- Voltage during discharging
- 12V (+/- 10%), Will be adjusted slightly based on Cable length
- Maximum load current during charging
- 1A
- Load
- 12 Watt Camera load (Load varies from 2.65 Watt to 10
- Backup time
- 12 Hours (Assumption based on 76.8Wh Battery Capacity and 5.5 Watt continuous load) Battery backup may vary based on the change in Power consumption
- Battery primary protection
- Using a separate PCB inside the battery pack to protect from all kinds of faults and issues men t ioned below. 1.Over current and Short circuit protection 2.Over voltage protection 3.Under voltage protection 4.Over charge protection 5.Deep discharge protection 6.Over temperature protection
- Output port
- Cable with compatible Power jack
General
- Dimensions
- 510mm x 425mm x 17mm
- Configuration
- 4S-1P
- Capacity
- 76.8Wh
- Cycle life
- 1000 @ 90% DOD
- Working temperature
- 0°C~60°C (Discharge), 0°C~45°C (Charge)
- Dimension
- 70 mm x 130 mm x 35 mm (±10) mm
- Cable length
- 3 Mtr.
- LED
- 1.Battery charging: Green Blink 2.Full charge: Green ON 3.Battery discharge: Red ON
- Fasteners
- U-Bolt, 101.6 mm, Hose Clamp, 150 mm
- Dimension.
- 550 mm x 450 mm x 105 mm
Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.
CP PLUS product pageMedia
Photos 1
Downloads
Official information
CP PLUS product page for CP-SL06KWorks with
Kits and accessories for this model
4G cameras
-
View details -
View details -
View details
Support
Warranty and repairs
Warranty is as per CP PLUS’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.
From CP PLUS
Practical notes
- Set up the camera in the brand’s mobile app as described in the quick start guide, and keep the app and firmware updated.
- Format the microSD card in the camera before first use.
- Note the serial number before mounting the camera; warranty claims need it.
Request a quote
Share the quantity and delivery location for CP-SL06K. Our sales desk replies with price and availability, subject to stock.
Enquiry received
Similar models
- View details
-
View details -
View details -
View details -
View details -
View details -
View details -
View details
Pairs with
-
View details -
View details - View details